| Generator Enclosure Design and Fabrication |
Our generator enclosures are contructed of formed aluminum panels atached to a aluminum structure. The enclosure is rated to a wind load of 120 MPH (150 MPH optional) and 50lbs./sq ft roof load. Rain test equal to 4 inches/hour. The basic structure meets all seismic requirements of Zone 4 or equivalent. The design and construction is modular in that the panels shall not exceed 24” in width and shall be minimum thickness of 0.90 gauge. Doors do not exceed 36” in width and be a minimum of 0.90 gauge. The roof of the enclosure meet or exceed the minimum gauge requirements specified but, in addition, shall be strengthened in such a manner as to support the largest commercially available exhaust silencer recommended by the engine manufacturer for this application. All exterior components of the enclosure are assembled utilizing stainless steel hardware. Please contact us for more information
|
| Switch Gear Enclosures Design and Fabricatioin |
DLC Power Diesel Corp manufactures electrical enclosures to your specifications. Whether you have a completely original enclosure design or you would like an industry standard enclosure with a few modifications, DLC Power Diesel Corp builds to your needs.
Advantages
- Economical
- Always built to your specifications
- Faster delivery
- Laser cut for burr free construction
- Powder paint in the colour you want
- Shipped ready for installation
- Best enclosure in terms of finish and appearance
|
|
